Get 10% OFF this item when bought with any aquarium!

D-D Pro Jump Guard Aquarium Cover

£35.98£59.98

SKU: 131816 Category:
Read More About Size
120cm x 90cm
180cm x 90cm
75cm x 75cm
Clear

Purchase this product now and earn 36 - 60 Points!

Description

Jumpguard DIY Aquarium Cover Pro

 

There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet.

Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.

 

D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.

 

 

Available sizes

Available in the following versions and are designed to be cut to size:

  • TC7575PRO – 75cm x 75cm nominal size. (29.5 inches x 29.5 inches)
  • TC12075PRO – 120cm x 75cm nominal size. (47.25 inches x 29.5 inches)
  • TC18090PRO – 180cm x 90cm nominal size. (70.8 inches x 35.4 inches)

Notes:

  1. The maximum size frame that can be made from each kit will be 3.6cm (1.4 inches) longer than stated in each direction.
  2. The tank should be measured from inside face of glass to inside face of glass and not the outer dimensions of the tank, which will vary due to glass thickness.

 

 

Included in the kit

 

The Jumpguard Tank Cover is designed sit neatly inside the top lip of the aquarium glass, with all items supplied oversized to allow you to cut to fit your own aquarium.

The rigid corner and extrusion design creates a very solid frame and is easily cut to the size of your aquarium.

 

 

Features of the NEW Jumpguard Tank Cover

 

The special extruded aluminium profile is now shaped with a lip which sits directly onto the edge of the glass, removing the requirement for any additional clips or brackets. The section is extruded then powder coated in a tough, low sheen black finish for greater scratch resistance and greater aesthetics.

 

The lower section of the corners is specifically designed so that it does not interfere with the silicone bead in the corners of your tank which gives a tight fit to the glass with no gaps. It also makes it easier and neater to cut off the corner if you want to bring wires out at the back of the tank for pumps and heaters

 

For those concerned with loss of light penetration into your reef tanks, we tested light levels with a Apogee MQ-200 meter and got the following results:

 

PAR without cover around 390 – 400 • PAR with cover around 380 – 390 • Approximately a 2.5% reduction in light with no shadowing at all.

 

Kit Contents:

TC75
90cm x 90cm (36″ x 36″) Black mesh
5 x 75cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline,total length 3.5m
2 x Black finger pull
2 x Reverse corner
1 x 75cm brace bar
4 x brace clips

 

TC120
140cm x 90cm (55″ x 36″) Black mesh
3 x 75cm + 2 x 120cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 4.4m
2 x Black finger pull
2 x Reverse corner
2 x 75cm brace bar
6 x brace clips
2 x T corners

 

TC180
200cm x 110cm (79″ x 43″) Black mesh
7 x 90cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 5.9m
2 x Black finger pull
8 x brace clips
3 x 90cm brace bar
2 x Reverse corner
2 x T corner

 

The new Jumpguard Pro now includes cutout and brace bar parts as standard and an aesthetic black mesh.

 

Additional information

Weight3.000 kg
Size

, ,

Reviews

There are no reviews yet.


Be the first to review “D-D Pro Jump Guard Aquarium Cover”