Apex Neptune Flow Sensors – Marine Aquatics

Apex Neptune Flow Sensors

£27.45£87.95

Clear

Purchase this product now and earn 27 - 88 Points!

Description

Flow Sensor – 1/4″ with push-fit connectors  (FS-25)

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses push-fit connectors to make connecting to your system as simple as possible.  The FS-25 will work with flow rates from 3-12 gph

Flow Sensor – 1/2″  (FS-50)

 

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses BSPP threads so for North American customers we have included two specially designed PVC adapters with slip fittings to adapt it to standard 1/2″ PVC plumbing.  The FS-50 will work with flow rates from 30-250 gph.

 

Flow Sensor – 1″  (FS-100)

 

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses BSPP threads so for North American customers we have included two specially designed PVC unions with slip fittings to adapt it to standard 1″ PVC plumbing.  The FS-100 will work with flow rates from 150-1500 gph.

 

Flow Sensor – 2″ (FS-200)

 

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses British Standard Parallel Pipe (BSPP) threads so for North American customers we have included two specially designed PVC unions with slip fittings to adapt it to standard 2″ PVC plumbing. The FS-200 will work with flow rates from 300-3000 gph.

 

In addition the 1/2″, 1″ and 2″ flow sensors will require additional threaded unions which can be found in our grey pipe plumbing section or follow link below

1/2 inch sensors requires 2 x 16mm unions

1 inch sensors requires 2 x 20mm unions

2 inch sensors requires 2 x 40mm unions

Sensor link: flow sensor fittings

Additional information

Weight0.500 kg
Model

, , ,

Reviews

There are no reviews yet.


Be the first to review “Apex Neptune Flow Sensors”

You've just added this product to the cart: