- Additional information
- Reviews (0)
An unbeatable team – Turbelle®pumps with electronic motor + Turbelle® controller – they can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals and the most important things. The following flow patterns can be produced in the aquarium very easily.
TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps with Driver 7240.26 / 7240.27 or electronic motor. The unit simulates the different marine flow conditions in the aquarium. By means of the Pump Adapter 7094.40, Turbelle® classic 2002 and 4002 can also be controlled. Multicontroller 7095 contains an LED moonlight with a 29-day moon phase and can control up to eight Turbelle®. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practice-oriented operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent. All pump connections are located on the lower side of the unit.
In case of a power failure, the various settings remain saved; after the power interruption, the Multicontroller continues to operate with the program.
Delivery with four connecting cables 7092.30 and a photo-electric cell. Up to four Turbelle® pumps and up to eight using the Y Adapter 7092.34 produce a near-nature flow control.
Wave simulation ("Pulse only") 7092 / 7095 / 7096
By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.
Simulation of tidal currents (“Interval”) 7095 / 7096
The pump channels are switched on or off alternately. The water flows through the reef from both sides at an adjustable switching time from 1 minute up to 12 hours.
Sequential pump circuit ("Sequential") 7095 / 7096
The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.
Random flow ("Sequential") 7095 / 7096
Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.
Feeding operation (Foodtimer) 7092 / 7095 / 7096
In all Turbelle® controllers, the pumps can be stopped completely by the push of a button to enable feeding. After about one to fifteen minutes (adjustable), a restart is carried out automatically
Moon-phase simulation ("Moonlight") 7095 / 7096
Multicontroller 7095 and 7096 contain a moon-phase simulation function with LED light and adjustable 29-day moon phase.
Operation in night mode ("Night mode") 7092 / 7095 / 7096
In all Turbelle® controllers, a photo-electric cell is used to reduce the performance of the Turbelle® pumps at night. As in a reef, small animals and plankton can rise in the aquarium completing the natural cycle of diurnal and nocturnal animals occupying the habitat..