TUNZE Multicontroller 7096

Description

General information.

An unbeatable team – Turbelle®pumps with electronic motor + Turbelle® controller – they can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals and the most important things. The following flow patterns can be produced in the aquarium very easily:

Multicontroller

(7096.000)

TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor, which can be adjusted and programmed by computer when attached by USB cable. The controller has been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the settings stored even in case of a power failure:
For adjustment by computer, the Multicontroller does not need a connection to the pumps in the tank. 
After adjustment by and saving on the computer, the data remain saved in the Multicontroller as well.
TUNZE® Multicontroller 7096 comprises the functions of Multicontroller 7095 and Wavecontroller 6091 as well as some other new control possibilities. It simulates various marine flow conditions in the aquarium and has been fitted with an especially bright LED moonlight. 
Scope of delivery: Multicontroller with photo-electric cell / moonlight and holder, 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program. 
Suitable for MS-Windows 98, 2000, XP, Vista and Win7.

Wave simulation ("Pulse only") 7092 / 7095 / 7096
By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.

Simulation of tidal currents (“Interval”) 7095 / 7096
The pump channels are switched on or off alternately. The water flows through the reef from both sides at an adjustable switching time from 1 minute up to 12 hours.

Sequential pump circuit ("Sequential") 7095 / 7096
The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.

Random flow ("Sequential") 7095 / 7096
Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.

Oscillating current with Wavebox or Turbelle® pumps 7092 / 7096.
In Multicontroller 7092 and 7096, the pump channels can be used as a Wavecontroller for the direct or alternating operation of the Wavebox or the Turbelle® pumps. This function comprises the automatic search of the resonance frequency, which can be combined with wash of waves or high and low tide simulation.

Feeding operation (Foodtimer) 7092 / 7095 / 7096
In all Turbelle® controllers, the pumps can be stopped completely by the push of a button to enable feeding. After about one to fifteen minutes (adjustable), a restart is carried out automatically.

Moon-phase simulation ("Moonlight") 7095 / 7096
Multicontroller 7095 and 7096 contain a moon-phase simulation function with LED light and adjustable 29-day moon phase.

Operation in night mode ("Night mode") 7092 / 7095 / 7096 
In all Turbelle® controllers, a photo-electric cell is used to reduce the performance of the Turbelle® pumps at night. As in a reef, small animals and plankton can rise in the aquarium completing the natural cycle of diurnal and nocturnal animals occupying the habitat..

Storm for desedimentation ("Storm cycle") 7096
Like in nature, sediment should be removed from a reef aquarium in regular intervals. This function can be programmed in Multicontroller 7096 to be carried out automatically; the pumps connected are controlled on the basis of an efficient and precise rhythm.

Additional information